Lego Mini-fig Documentation

Anthony Nunez                           

 

For this project I used a real lego mini-fig gave to me by and measured everything then put the measurements in fusion and

printed it in a 3d printer. My favorite part was seeing that it work and how smooth it was to move the pieces of the lego mini-fig.

Some of The tools I used were fillet, combined, extrude, hole, press and pull and etcetera.  Problems I faced was the upper hip on

the lego figure. The way I fixed it was by using fillet to smooth it down so the legs can fit. This project helped me learn how to use

fusion 360 and how to work a 3d printer. If I was to change anything i would changed the way I used the tools in fusion.

  

Learn More

Lego Brick Documentation

 Anthony Nunez

For this project, I used fusion and, measured a real Lego brick, to make a 3d printed Lego brick.

The hardest part of the Lego brick, was making the circles on the top and spacing the circles to fit onto the bottom part of the

Lego. To overcome this problem, I made the circles bigger and space it more until it fit.

My favorite part was using the calipers and writing the measurements for the Lego bricks and the Lego mini figures.

This program help me understand 3d printing more and by using tools like mirror, fillet and line. I learned how to print a Lego

brick and how to use supports by using flash print. If there was anything different I would change, is the way I used

 

 

Learn More

Mancala board Documentaion

Anthony Nunez

 

For this project I used a Mancala board hat i had at my home, and measured it, then put the measurements from the Mancala

board into fusion then Carvey it.My favorite part was when i The tools I used where fillet, mirror, move, and create.

The tools i use were fusion and the Carvey. The challenge I faced was creating the circles. the way i fixed it was by changing it

until i liked it. If there was anything I will change I would change the way I created the circles and make it smoother

.

Learn More

Laser cut maze/key-chain

Anthony Nunez                  

 

For this  project I used a picture of a kingdom hearts crown online, then trace it. After that I trace the lines in the kingdom hearts

picture, Using inks-cape. My favorite part was picking the picture I used the make the maze out of Then Laser cut the

bottom, middle and front of the maze, and glue/screwed it together.The tools I used in inks cape  where the bezier tool, edit path

tool, and select tool.I learn how to create a maze in inks-cape, how to use some of the tools in inks-cape, and laser cut.

The challenges that I faced was the program that I used and learning the tools.I would change the way I used the tools and make

a harder object to laser cut.

.

 

Learn More

Lego Mini-fig Documentation

Anthony Nunez                           

 

For this project I used a real lego mini-fig gave to me by and measured everything then put the measurements in fusion and

printed it in a 3d printer. My favorite part was seeing that it work and how smooth it was to move the pieces of the lego mini-fig.

Some of The tools I used were fillet, combined, extrude, hole, press and pull and etcetera.  Problems I faced was the upper hip on

the lego figure. The way I fixed it was by using fillet to smooth it down so the legs can fit. This project helped me learn how to use

fusion 360 and how to work a 3d printer. If I was to change anything i would changed the way I used the tools in fusion.

  

Learn More

Lego Brick Documentation

 Anthony Nunez

For this project, I used fusion and, measured a real Lego brick, to make a 3d printed Lego brick.

The hardest part of the Lego brick, was making the circles on the top and spacing the circles to fit onto the bottom part of the

Lego. To overcome this problem, I made the circles bigger and space it more until it fit.

My favorite part was using the calipers and writing the measurements for the Lego bricks and the Lego mini figures.

This program help me understand 3d printing more and by using tools like mirror, fillet and line. I learned how to print a Lego

brick and how to use supports by using flash print. If there was anything different I would change, is the way I used

 

 

Learn More

Mancala board Documentaion

Anthony Nunez

 

For this project I used a Mancala board hat i had at my home, and measured it, then put the measurements from the Mancala

board into fusion then Carvey it.My favorite part was when i The tools I used where fillet, mirror, move, and create.

The tools i use were fusion and the Carvey. The challenge I faced was creating the circles. the way i fixed it was by changing it

until i liked it. If there was anything I will change I would change the way I created the circles and make it smoother

.

Learn More

Laser cut maze/key-chain

Anthony Nunez                  

 

For this  project I used a picture of a kingdom hearts crown online, then trace it. After that I trace the lines in the kingdom hearts

picture, Using inks-cape. My favorite part was picking the picture I used the make the maze out of Then Laser cut the

bottom, middle and front of the maze, and glue/screwed it together.The tools I used in inks cape  where the bezier tool, edit path

tool, and select tool.I learn how to create a maze in inks-cape, how to use some of the tools in inks-cape, and laser cut.

The challenges that I faced was the program that I used and learning the tools.I would change the way I used the tools and make

a harder object to laser cut.

.

 

Learn More

Lego Mini-fig Documentation

Anthony Nunez                           

 

For this project I used a real lego mini-fig gave to me by and measured everything then put the measurements in fusion and

printed it in a 3d printer. My favorite part was seeing that it work and how smooth it was to move the pieces of the lego mini-fig.

Some of The tools I used were fillet, combined, extrude, hole, press and pull and etcetera.  Problems I faced was the upper hip on

the lego figure. The way I fixed it was by using fillet to smooth it down so the legs can fit. This project helped me learn how to use

fusion 360 and how to work a 3d printer. If I was to change anything i would changed the way I used the tools in fusion.

  

Learn More

Lego Brick Documentation

 Anthony Nunez

For this project, I used fusion and, measured a real Lego brick, to make a 3d printed Lego brick.

The hardest part of the Lego brick, was making the circles on the top and spacing the circles to fit onto the bottom part of the

Lego. To overcome this problem, I made the circles bigger and space it more until it fit.

My favorite part was using the calipers and writing the measurements for the Lego bricks and the Lego mini figures.

This program help me understand 3d printing more and by using tools like mirror, fillet and line. I learned how to print a Lego

brick and how to use supports by using flash print. If there was anything different I would change, is the way I used

 

 

Learn More

Mancala board Documentaion

Anthony Nunez

 

For this project I used a Mancala board hat i had at my home, and measured it, then put the measurements from the Mancala

board into fusion then Carvey it.My favorite part was when i The tools I used where fillet, mirror, move, and create.

The tools i use were fusion and the Carvey. The challenge I faced was creating the circles. the way i fixed it was by changing it

until i liked it. If there was anything I will change I would change the way I created the circles and make it smoother

.

Learn More

Laser cut maze/key-chain

Anthony Nunez                  

 

For this  project I used a picture of a kingdom hearts crown online, then trace it. After that I trace the lines in the kingdom hearts

picture, Using inks-cape. My favorite part was picking the picture I used the make the maze out of Then Laser cut the

bottom, middle and front of the maze, and glue/screwed it together.The tools I used in inks cape  where the bezier tool, edit path

tool, and select tool.I learn how to create a maze in inks-cape, how to use some of the tools in inks-cape, and laser cut.

The challenges that I faced was the program that I used and learning the tools.I would change the way I used the tools and make

a harder object to laser cut.

.

 

Learn More

News & Updates

This Is a Description For The Homepage

Lego Mini-fig Documentation

Posted by anunez on May 10, 2019

Anthony Nunez                              For this project I used a real lego mini-fig gave to me by and measured everything then put the measurements in fusion and printed it in a 3d printer. My favorite part was seeing that it work and how smooth it was to...

Learn More
Lego Brick Documentation

Lego Brick Documentation

Posted by anunez on May 8, 2019

 Anthony Nunez For this project, I used fusion and, measured a real Lego brick, to make a 3d printed Lego brick. The hardest part of the Lego brick, was making the circles on the top and spacing the circles to fit onto the bottom part of the Lego. To overcome this...

Learn More
Mancala board Documentaion

Mancala board Documentaion

Posted by anunez on May 8, 2019

Anthony Nunez   For this project I used a Mancala board hat i had at my home, and measured it, then put the measurements from the Mancala board into fusion then Carvey it.My favorite part was when i The tools I used where fillet, mirror, move, and create. The...

Learn More
Laser cut maze/key-chain

Laser cut maze/key-chain

Posted by anunez on May 8, 2019

Anthony Nunez                     For this  project I used a picture of a kingdom hearts crown online, then trace it. After that I trace the lines in the kingdom hearts picture, Using inks-cape. My favorite part was picking the picture I used the make the maze...

Learn More

Work & Feedback

Work & Feedback section description

Plans & Pricing

Plans & Pricing section description

Anthony Nunez                           

 

For this project I used a real lego mini-fig gave to me by and measured everything then put the measurements in fusion and

printed it in a 3d printer. My favorite part was seeing that it work and how smooth it was to move the pieces of the lego mini-fig.

Some of The tools I used were fillet, combined, extrude, hole, press and pull and etcetera.  Problems I faced was the upper hip on

the lego figure. The way I fixed it was by using fillet to smooth it down so the legs can fit. This project helped me learn how to use

fusion 360 and how to work a 3d printer. If I was to change anything i would changed the way I used the tools in fusion.

  

View Plans and Pricing

 Anthony Nunez

For this project, I used fusion and, measured a real Lego brick, to make a 3d printed Lego brick.

The hardest part of the Lego brick, was making the circles on the top and spacing the circles to fit onto the bottom part of the

Lego. To overcome this problem, I made the circles bigger and space it more until it fit.

My favorite part was using the calipers and writing the measurements for the Lego bricks and the Lego mini figures.

This program help me understand 3d printing more and by using tools like mirror, fillet and line. I learned how to print a Lego

brick and how to use supports by using flash print. If there was anything different I would change, is the way I used

 

 

View Plans and Pricing

Anthony Nunez

 

For this project I used a Mancala board hat i had at my home, and measured it, then put the measurements from the Mancala

board into fusion then Carvey it.My favorite part was when i The tools I used where fillet, mirror, move, and create.

The tools i use were fusion and the Carvey. The challenge I faced was creating the circles. the way i fixed it was by changing it

until i liked it. If there was anything I will change I would change the way I created the circles and make it smoother

.

View Plans and Pricing

Anthony Nunez                  

 

For this  project I used a picture of a kingdom hearts crown online, then trace it. After that I trace the lines in the kingdom hearts

picture, Using inks-cape. My favorite part was picking the picture I used the make the maze out of Then Laser cut the

bottom, middle and front of the maze, and glue/screwed it together.The tools I used in inks cape  where the bezier tool, edit path

tool, and select tool.I learn how to create a maze in inks-cape, how to use some of the tools in inks-cape, and laser cut.

The challenges that I faced was the program that I used and learning the tools.I would change the way I used the tools and make

a harder object to laser cut.

.

 

View Plans and Pricing