Capstone project Reflection

I like my capstone project. I think it’s cute. The prompt was to create a project that uses at least 2 skills that we learned. I used 3D printing and circuits. My project is a 3D model of the rose from Beauty And The Beast. If you press the play-doh, it will play the song “Belle”. I made this project because I had recently seen the new live action remake and wanted to make something based on that. It was pretty easy to make this project… first, I created the rose on Tinkercad. Next, I hooked up the song to a keyboard on Soundplant. Then, I cleaned and attached the 3D prints. After that, I tested and fixed the rose. Finally I was done. I could admire my work! The biggest problem that I had was that plastic is not conductive, but I fixed that easily with some play-doh. The most important thing I learned in this project was that you could copy urls of YouTube videos to get the audio. That was really helpful. If I did this differently, I would have chosen a different song, like “Evermore”. I also could have printed something different, but I like the rose. If you ever made something like this, a tip I’d give you is to use bunny ears in Tinkercad to make rose petals. It really adds a nice touch.I liked creating this rose, and I hope that you enjoy it, too!

Learn More

Capstone Project… So far.

My Capstone project is Beauty And The Beast themed. It is going to have a 3D print of the rose, and if you touch it, the rose will play ‘Belle’. I have designed the print in Tinkercad but I have not printed it yet. I will update this when I have. Next I plan to glue the prints together and attach the makeymakey! Then, people could use it!:)

Learn More

A new way to play the t-rex game!

egraf_makeymakey

I made a cute controller with a makeymakey for the t-rex game! All I used was paper, two pencils, and the makeymakey kit. it’s pretty simple, all you do is press the cactus to jump, and the bird to duck! I made it because the t-rex game is fun and I wanted a new way to play it!

Learn More

I love graphic design. I created this cute picture using GIMP, and that was fun. I also made it into an animation, all you do is sit back and watch! I made it because I wanted to make something about me!

Learn More

Capstone project Reflection

I like my capstone project. I think it’s cute. The prompt was to create a project that uses at least 2 skills that we learned. I used 3D printing and circuits. My project is a 3D model of the rose from Beauty And The Beast. If you press the play-doh, it will play the song “Belle”. I made this project because I had recently seen the new live action remake and wanted to make something based on that. It was pretty easy to make this project… first, I created the rose on Tinkercad. Next, I hooked up the song to a keyboard on Soundplant. Then, I cleaned and attached the 3D prints. After that, I tested and fixed the rose. Finally I was done. I could admire my work! The biggest problem that I had was that plastic is not conductive, but I fixed that easily with some play-doh. The most important thing I learned in this project was that you could copy urls of YouTube videos to get the audio. That was really helpful. If I did this differently, I would have chosen a different song, like “Evermore”. I also could have printed something different, but I like the rose. If you ever made something like this, a tip I’d give you is to use bunny ears in Tinkercad to make rose petals. It really adds a nice touch.I liked creating this rose, and I hope that you enjoy it, too!

Learn More

Capstone Project… So far.

My Capstone project is Beauty And The Beast themed. It is going to have a 3D print of the rose, and if you touch it, the rose will play ‘Belle’. I have designed the print in Tinkercad but I have not printed it yet. I will update this when I have. Next I plan to glue the prints together and attach the makeymakey! Then, people could use it!:)

Learn More

A new way to play the t-rex game!

egraf_makeymakey

I made a cute controller with a makeymakey for the t-rex game! All I used was paper, two pencils, and the makeymakey kit. it’s pretty simple, all you do is press the cactus to jump, and the bird to duck! I made it because the t-rex game is fun and I wanted a new way to play it!

Learn More

I love graphic design. I created this cute picture using GIMP, and that was fun. I also made it into an animation, all you do is sit back and watch! I made it because I wanted to make something about me!

Learn More

Capstone project Reflection

I like my capstone project. I think it’s cute. The prompt was to create a project that uses at least 2 skills that we learned. I used 3D printing and circuits. My project is a 3D model of the rose from Beauty And The Beast. If you press the play-doh, it will play the song “Belle”. I made this project because I had recently seen the new live action remake and wanted to make something based on that. It was pretty easy to make this project… first, I created the rose on Tinkercad. Next, I hooked up the song to a keyboard on Soundplant. Then, I cleaned and attached the 3D prints. After that, I tested and fixed the rose. Finally I was done. I could admire my work! The biggest problem that I had was that plastic is not conductive, but I fixed that easily with some play-doh. The most important thing I learned in this project was that you could copy urls of YouTube videos to get the audio. That was really helpful. If I did this differently, I would have chosen a different song, like “Evermore”. I also could have printed something different, but I like the rose. If you ever made something like this, a tip I’d give you is to use bunny ears in Tinkercad to make rose petals. It really adds a nice touch.I liked creating this rose, and I hope that you enjoy it, too!

Learn More

Capstone Project… So far.

My Capstone project is Beauty And The Beast themed. It is going to have a 3D print of the rose, and if you touch it, the rose will play ‘Belle’. I have designed the print in Tinkercad but I have not printed it yet. I will update this when I have. Next I plan to glue the prints together and attach the makeymakey! Then, people could use it!:)

Learn More

A new way to play the t-rex game!

egraf_makeymakey

I made a cute controller with a makeymakey for the t-rex game! All I used was paper, two pencils, and the makeymakey kit. it’s pretty simple, all you do is press the cactus to jump, and the bird to duck! I made it because the t-rex game is fun and I wanted a new way to play it!

Learn More

I love graphic design. I created this cute picture using GIMP, and that was fun. I also made it into an animation, all you do is sit back and watch! I made it because I wanted to make something about me!

Learn More

News & Updates

This Is a Description For The Homepage

Capstone project Reflection

Posted by egraf on May 16, 2017

I like my capstone project. I think it’s cute. The prompt was to create a project that uses at least 2 skills that we learned. I used 3D printing and circuits. My project is a 3D model of the rose from Beauty And The Beast. If you press the play-doh, it will play the...

Learn More
Capstone Project… So far.

Capstone Project… So far.

Posted by egraf on May 11, 2017

My Capstone project is Beauty And The Beast themed. It is going to have a 3D print of the rose, and if you touch it, the rose will play ‘Belle’. I have designed the print in Tinkercad but I have not printed it yet. I will update this when I have. Next I...

Learn More

A new way to play the t-rex game!

Posted by egraf on Apr 27, 2017

egraf_makeymakey I made a cute controller with a makeymakey for the t-rex game! All I used was paper, two pencils, and the makeymakey kit. it’s pretty simple, all you do is press the cactus to jump, and the bird to duck! I made it because the t-rex game is fun...

Learn More

Posted by egraf on Apr 26, 2017

I love graphic design. I created this cute picture using GIMP, and that was fun. I also made it into an animation, all you do is sit back and watch! I made it because I wanted to make something about...

Learn More

Work & Feedback

Work & Feedback section description

Plans & Pricing

Plans & Pricing section description

I like my capstone project. I think it’s cute. The prompt was to create a project that uses at least 2 skills that we learned. I used 3D printing and circuits. My project is a 3D model of the rose from Beauty And The Beast. If you press the play-doh, it will play the song “Belle”. I made this project because I had recently seen the new live action remake and wanted to make something based on that. It was pretty easy to make this project… first, I created the rose on Tinkercad. Next, I hooked up the song to a keyboard on Soundplant. Then, I cleaned and attached the 3D prints. After that, I tested and fixed the rose. Finally I was done. I could admire my work! The biggest problem that I had was that plastic is not conductive, but I fixed that easily with some play-doh. The most important thing I learned in this project was that you could copy urls of YouTube videos to get the audio. That was really helpful. If I did this differently, I would have chosen a different song, like “Evermore”. I also could have printed something different, but I like the rose. If you ever made something like this, a tip I’d give you is to use bunny ears in Tinkercad to make rose petals. It really adds a nice touch.I liked creating this rose, and I hope that you enjoy it, too!

View Plans and Pricing

My Capstone project is Beauty And The Beast themed. It is going to have a 3D print of the rose, and if you touch it, the rose will play ‘Belle’. I have designed the print in Tinkercad but I have not printed it yet. I will update this when I have. Next I plan to glue the prints together and attach the makeymakey! Then, people could use it!:)

View Plans and Pricing

egraf_makeymakey

I made a cute controller with a makeymakey for the t-rex game! All I used was paper, two pencils, and the makeymakey kit. it’s pretty simple, all you do is press the cactus to jump, and the bird to duck! I made it because the t-rex game is fun and I wanted a new way to play it!

View Plans and Pricing

I love graphic design. I created this cute picture using GIMP, and that was fun. I also made it into an animation, all you do is sit back and watch! I made it because I wanted to make something about me!

View Plans and Pricing