3D Printer Build

While making my 3D printer I learned why the different components of the printer are so important to the way it functions. For example, the fans, they help cool the filament after it comes out of the hot end.

The biggest challenge of making the printer was wiring and building the main printing part. Because, it had a lot of parts and it got confusing at times. We solved this by working together and watching the video.

Im most proud of the fact that it turns on and could possibly work. Also, that we built the printer from parts in a box and a video.

It was cool to work with my team. We really didn’t have roles or responsibilities we just worked as we went along. We worked together when we got to hard parts of building. When someone didn’t get something someone else would help them. We also worked together when we wired and put on the motors.

In our group we really didn’t have any problems. We were able to work efficiently and get the printer done.

I would definitely build another build another printer, because it was a lot of fun to build

.

 

Learn More

Capstone Project Reflection

The capstone project prompt was to combine 2 units of your choice (circuts, 3D printing, scratch, Graphic Design, or wed design) and create a project.

My project is an interactive spongebob squarepants. When you touch a body part (feet or the eyes) he makes a sound.

I made this project because I really like the cartoon and i thought it would be cool to make one tha is my own and interactive.

I made it by 3D printing the body or the basic frame then i lined the walls on the inside with play-dough a.nd connected my aligator chips from the inside to wach body part. My process of making it was going on Tinkercad and making the frame but hollowing the inside out and making holes for each part. Then while that printed I started to make the other body parts like the legs (made out of PVC pipes) and an accessory which it his hat. After his body printed i made chothes out of tape and i put them on him. By the time i finished the whole project it was the day of the showcase so i put everything together and i got my results of the project.

One problen that i faced was getting my soundboard to act right because sometimes it would crash or keep on repeating. I overcame that challenge by re setting up my soundboard or moving it around and letting it rest.

I learned how to improvise, because i had to come up with ways to make my project look more realistic so i used the pipes, construction paper , and pipe cleaners to make the other parts and his hat.

I wouldn’t do anything differently next time. Im proud of my project and i thik i did a good job.

I would tell the person who i making this project to pay attention to the details like the holes and the design you do and how you do it because some of the things you add on may interfere with the main parts of your project.

Learn More

Spongebob progress

Screen Shot 2017-01-12 at 6.01.57 PMSo far the progress i’ve made was 3D printing my actual model. Right now i’ve haven’t had any troubles. Making my shoes and prototyping my hat is working. I plan on making my pants and the hat and some accessories for my project.

Learn More

My Circuits Mini project

photo-on-1-6-17-at-4-39-pm

  1. The Project Prompt was to make an interactive expirence
  2. My project was an interactive spongebob model
  3. I made this because i tought it would be cool to make it
  4. I planned this by looking up pictures online
  5. I faced the challenge of hooking up the circuts and making sure they worked
  6. I would change my parts like the arms
Learn More

My Spongebob Capstone Project

For my capstone project i will be dooing a 3D printed Makey Makey Spongebob. I wanted to do this because i already made a prototype version of it so i decided to 3D print it. Also, i wanted to keep it simple so this is pretty simple compared to my first idea.

For my project i will need:

  • a 3D printer
  • Yellow fillament
  • brown fillament
  • a makey makey kit
  • yellow play dough
  • black play dough (if possible)
  • 4 yellow alligator clips

 

Learn More

MY goals for Maker Foundations

  • finish my spongebob i made during the circuts unit
  • become a member
  • 3D print more things
  • make new friends
  • become a makerette
Learn More

3D Printer Build

While making my 3D printer I learned why the different components of the printer are so important to the way it functions. For example, the fans, they help cool the filament after it comes out of the hot end.

The biggest challenge of making the printer was wiring and building the main printing part. Because, it had a lot of parts and it got confusing at times. We solved this by working together and watching the video.

Im most proud of the fact that it turns on and could possibly work. Also, that we built the printer from parts in a box and a video.

It was cool to work with my team. We really didn’t have roles or responsibilities we just worked as we went along. We worked together when we got to hard parts of building. When someone didn’t get something someone else would help them. We also worked together when we wired and put on the motors.

In our group we really didn’t have any problems. We were able to work efficiently and get the printer done.

I would definitely build another build another printer, because it was a lot of fun to build

.

 

Learn More

Capstone Project Reflection

The capstone project prompt was to combine 2 units of your choice (circuts, 3D printing, scratch, Graphic Design, or wed design) and create a project.

My project is an interactive spongebob squarepants. When you touch a body part (feet or the eyes) he makes a sound.

I made this project because I really like the cartoon and i thought it would be cool to make one tha is my own and interactive.

I made it by 3D printing the body or the basic frame then i lined the walls on the inside with play-dough a.nd connected my aligator chips from the inside to wach body part. My process of making it was going on Tinkercad and making the frame but hollowing the inside out and making holes for each part. Then while that printed I started to make the other body parts like the legs (made out of PVC pipes) and an accessory which it his hat. After his body printed i made chothes out of tape and i put them on him. By the time i finished the whole project it was the day of the showcase so i put everything together and i got my results of the project.

One problen that i faced was getting my soundboard to act right because sometimes it would crash or keep on repeating. I overcame that challenge by re setting up my soundboard or moving it around and letting it rest.

I learned how to improvise, because i had to come up with ways to make my project look more realistic so i used the pipes, construction paper , and pipe cleaners to make the other parts and his hat.

I wouldn’t do anything differently next time. Im proud of my project and i thik i did a good job.

I would tell the person who i making this project to pay attention to the details like the holes and the design you do and how you do it because some of the things you add on may interfere with the main parts of your project.

Learn More

Spongebob progress

Screen Shot 2017-01-12 at 6.01.57 PMSo far the progress i’ve made was 3D printing my actual model. Right now i’ve haven’t had any troubles. Making my shoes and prototyping my hat is working. I plan on making my pants and the hat and some accessories for my project.

Learn More

My Circuits Mini project

photo-on-1-6-17-at-4-39-pm

  1. The Project Prompt was to make an interactive expirence
  2. My project was an interactive spongebob model
  3. I made this because i tought it would be cool to make it
  4. I planned this by looking up pictures online
  5. I faced the challenge of hooking up the circuts and making sure they worked
  6. I would change my parts like the arms
Learn More

My Spongebob Capstone Project

For my capstone project i will be dooing a 3D printed Makey Makey Spongebob. I wanted to do this because i already made a prototype version of it so i decided to 3D print it. Also, i wanted to keep it simple so this is pretty simple compared to my first idea.

For my project i will need:

  • a 3D printer
  • Yellow fillament
  • brown fillament
  • a makey makey kit
  • yellow play dough
  • black play dough (if possible)
  • 4 yellow alligator clips

 

Learn More

MY goals for Maker Foundations

  • finish my spongebob i made during the circuts unit
  • become a member
  • 3D print more things
  • make new friends
  • become a makerette
Learn More

3D Printer Build

While making my 3D printer I learned why the different components of the printer are so important to the way it functions. For example, the fans, they help cool the filament after it comes out of the hot end.

The biggest challenge of making the printer was wiring and building the main printing part. Because, it had a lot of parts and it got confusing at times. We solved this by working together and watching the video.

Im most proud of the fact that it turns on and could possibly work. Also, that we built the printer from parts in a box and a video.

It was cool to work with my team. We really didn’t have roles or responsibilities we just worked as we went along. We worked together when we got to hard parts of building. When someone didn’t get something someone else would help them. We also worked together when we wired and put on the motors.

In our group we really didn’t have any problems. We were able to work efficiently and get the printer done.

I would definitely build another build another printer, because it was a lot of fun to build

.

 

Learn More

Capstone Project Reflection

The capstone project prompt was to combine 2 units of your choice (circuts, 3D printing, scratch, Graphic Design, or wed design) and create a project.

My project is an interactive spongebob squarepants. When you touch a body part (feet or the eyes) he makes a sound.

I made this project because I really like the cartoon and i thought it would be cool to make one tha is my own and interactive.

I made it by 3D printing the body or the basic frame then i lined the walls on the inside with play-dough a.nd connected my aligator chips from the inside to wach body part. My process of making it was going on Tinkercad and making the frame but hollowing the inside out and making holes for each part. Then while that printed I started to make the other body parts like the legs (made out of PVC pipes) and an accessory which it his hat. After his body printed i made chothes out of tape and i put them on him. By the time i finished the whole project it was the day of the showcase so i put everything together and i got my results of the project.

One problen that i faced was getting my soundboard to act right because sometimes it would crash or keep on repeating. I overcame that challenge by re setting up my soundboard or moving it around and letting it rest.

I learned how to improvise, because i had to come up with ways to make my project look more realistic so i used the pipes, construction paper , and pipe cleaners to make the other parts and his hat.

I wouldn’t do anything differently next time. Im proud of my project and i thik i did a good job.

I would tell the person who i making this project to pay attention to the details like the holes and the design you do and how you do it because some of the things you add on may interfere with the main parts of your project.

Learn More

Spongebob progress

Screen Shot 2017-01-12 at 6.01.57 PMSo far the progress i’ve made was 3D printing my actual model. Right now i’ve haven’t had any troubles. Making my shoes and prototyping my hat is working. I plan on making my pants and the hat and some accessories for my project.

Learn More

My Circuits Mini project

photo-on-1-6-17-at-4-39-pm

  1. The Project Prompt was to make an interactive expirence
  2. My project was an interactive spongebob model
  3. I made this because i tought it would be cool to make it
  4. I planned this by looking up pictures online
  5. I faced the challenge of hooking up the circuts and making sure they worked
  6. I would change my parts like the arms
Learn More

My Spongebob Capstone Project

For my capstone project i will be dooing a 3D printed Makey Makey Spongebob. I wanted to do this because i already made a prototype version of it so i decided to 3D print it. Also, i wanted to keep it simple so this is pretty simple compared to my first idea.

For my project i will need:

  • a 3D printer
  • Yellow fillament
  • brown fillament
  • a makey makey kit
  • yellow play dough
  • black play dough (if possible)
  • 4 yellow alligator clips

 

Learn More

MY goals for Maker Foundations

  • finish my spongebob i made during the circuts unit
  • become a member
  • 3D print more things
  • make new friends
  • become a makerette
Learn More

News & Updates

This Is a Description For The Homepage

3D Printer Build

3D Printer Build

Posted by tchasebynum on Mar 15, 2017

While making my 3D printer I learned why the different components of the printer are so important to the way it functions. For example, the fans, they help cool the filament after it comes out of the hot end. The biggest challenge of making the printer was wiring and...

Learn More

Capstone Project Reflection

Posted by tchasebynum on Jan 24, 2017

The capstone project prompt was to combine 2 units of your choice (circuts, 3D printing, scratch, Graphic Design, or wed design) and create a project. My project is an interactive spongebob squarepants. When you touch a body part (feet or the eyes) he makes a sound. I...

Learn More
Spongebob progress

Spongebob progress

Posted by tchasebynum on Jan 12, 2017

So far the progress i’ve made was 3D printing my actual model. Right now i’ve haven’t had any troubles. Making my shoes and prototyping my hat is working. I plan on making my pants and the hat and some accessories for my...

Learn More
My Circuits Mini project

My Circuits Mini project

Posted by tchasebynum on Jan 6, 2017

The Project Prompt was to make an interactive expirence My project was an interactive spongebob model I made this because i tought it would be cool to make it I planned this by looking up pictures online I faced the challenge of hooking up the circuts and making sure...

Learn More

My Spongebob Capstone Project

Posted by tchasebynum on Jan 3, 2017

For my capstone project i will be dooing a 3D printed Makey Makey Spongebob. I wanted to do this because i already made a prototype version of it so i decided to 3D print it. Also, i wanted to keep it simple so this is pretty simple compared to my first idea. For my...

Learn More

MY goals for Maker Foundations

Posted by tchasebynum on Dec 12, 2016

finish my spongebob i made during the circuts unit become a member 3D print more things make new friends become a makerette

Learn More

Work & Feedback

Work & Feedback section description

Plans & Pricing

Plans & Pricing section description

While making my 3D printer I learned why the different components of the printer are so important to the way it functions. For example, the fans, they help cool the filament after it comes out of the hot end.

The biggest challenge of making the printer was wiring and building the main printing part. Because, it had a lot of parts and it got confusing at times. We solved this by working together and watching the video.

Im most proud of the fact that it turns on and could possibly work. Also, that we built the printer from parts in a box and a video.

It was cool to work with my team. We really didn’t have roles or responsibilities we just worked as we went along. We worked together when we got to hard parts of building. When someone didn’t get something someone else would help them. We also worked together when we wired and put on the motors.

In our group we really didn’t have any problems. We were able to work efficiently and get the printer done.

I would definitely build another build another printer, because it was a lot of fun to build

.

 

View Plans and Pricing

The capstone project prompt was to combine 2 units of your choice (circuts, 3D printing, scratch, Graphic Design, or wed design) and create a project.

My project is an interactive spongebob squarepants. When you touch a body part (feet or the eyes) he makes a sound.

I made this project because I really like the cartoon and i thought it would be cool to make one tha is my own and interactive.

I made it by 3D printing the body or the basic frame then i lined the walls on the inside with play-dough a.nd connected my aligator chips from the inside to wach body part. My process of making it was going on Tinkercad and making the frame but hollowing the inside out and making holes for each part. Then while that printed I started to make the other body parts like the legs (made out of PVC pipes) and an accessory which it his hat. After his body printed i made chothes out of tape and i put them on him. By the time i finished the whole project it was the day of the showcase so i put everything together and i got my results of the project.

One problen that i faced was getting my soundboard to act right because sometimes it would crash or keep on repeating. I overcame that challenge by re setting up my soundboard or moving it around and letting it rest.

I learned how to improvise, because i had to come up with ways to make my project look more realistic so i used the pipes, construction paper , and pipe cleaners to make the other parts and his hat.

I wouldn’t do anything differently next time. Im proud of my project and i thik i did a good job.

I would tell the person who i making this project to pay attention to the details like the holes and the design you do and how you do it because some of the things you add on may interfere with the main parts of your project.

View Plans and Pricing

Screen Shot 2017-01-12 at 6.01.57 PMSo far the progress i’ve made was 3D printing my actual model. Right now i’ve haven’t had any troubles. Making my shoes and prototyping my hat is working. I plan on making my pants and the hat and some accessories for my project.

View Plans and Pricing

photo-on-1-6-17-at-4-39-pm

  1. The Project Prompt was to make an interactive expirence
  2. My project was an interactive spongebob model
  3. I made this because i tought it would be cool to make it
  4. I planned this by looking up pictures online
  5. I faced the challenge of hooking up the circuts and making sure they worked
  6. I would change my parts like the arms
View Plans and Pricing

For my capstone project i will be dooing a 3D printed Makey Makey Spongebob. I wanted to do this because i already made a prototype version of it so i decided to 3D print it. Also, i wanted to keep it simple so this is pretty simple compared to my first idea.

For my project i will need:

 

View Plans and Pricing View Plans and Pricing